Igama lomkhiqizo kanye nohlobo: Ifilimu evikela ukuqinaUchungechunge lwe-YM30
Izici Eziyinhloko Zomkhiqizo
i-primer eyodwa noma ezimbili, umsebenzi omuhle kakhulu wokungashintshi futhi kunzima ukulibazisa, ukuba yisicaba okuhle kakhulu, ukuqina okuhle kokushisa, ikhwalithi enhle yendawo.
Isicelo Esiyinhloko
isetshenziselwa ifilimu yokuvikela evikelayo engashukumi, ifilimu yokuvikela evikelayo enamathelayo engashukumi (evikela uthuli, engashukumi).
Isakhiwo
Ishidi le-data
Ubukhulu be-YM30A buhlanganisa: 38μm, 50μm, 75μm, 100μm kanye no-125μm, njll.
| IMPAHLA | IYUNITHI | INANI ELIJWAYELEKILE | INDLELA YOKUHLOLA | ||
| UKUQINA | µm | 38 | 50 | I-ASTM D374 | |
| AMANDLA OKUNQANDA | MD | I-MPa | 254 | 232 | I-ASTM D882 |
| TD | I-MPa | 294 | 240 | ||
| UKULINGISWA | MD | % | 153 | 143 | |
| TD | % | 124 | 140 | ||
| UKUSHISA OKUNCIPHISAYO | MD | % | 1.24 | 1.15 | I-ASTM D1204 （150℃×30min） |
| TD | % | 0.03 | -0.01 | ||
| I-COEFFICIENT YE-FRICTION | μs | — | 0.32 | 0.28 | I-ASTM D1894 |
| μd | — | 0.39 | 0.29 | ||
| UKUDLULISELA | % | 93.8 | 92.8 | I-ASTM D1003 | |
| UMSINDO | % | 1.97 | 2.40 | ||
| UKUMELANA NOKUBHEKA KOMHLABA | Ω | 105-10 | I-GB 13542.4 | ||
| UKUQINA OKUNAMATHELAYO | % | ≥97 | IZINDLELA ZOKUGQIBELA | ||
| UKUNGENWA OKUMANZISAYO | i-dyne/cm | 58/58 | 58/58 | I-ASTM D2578 | |
| UKUBUKEKA | — | OK | INDLELA YE-EMTCO | ||
| AMAZWI | Ngenhla kunamanani ajwayelekile, hhayi amanani aqinisekisayo. Uma amakhasimende enezidingo ezikhethekile, ngokuya ngokusetshenziswa kwenkontileka yobuchwepheshe. | ||||
Ukuhlolwa kokuxinana kwamanzi kusebenza kuphela kwifilimu ephathwe nge-corona.
Uchungechunge lwe-YM30 luhlanganisa i-YM30, i-YM30A, i-YM31, zihlukile ku-AS primer.
Isikhathi sokuthunyelwe: Septhemba-03-2024
